XC Tracer II FLARM is a solar-variometer with integrated FLARM for paraglider and hangglider pilots. XC Tracer II FLARM transmits once or twice per second the position of the aircraft as well as a forecast of its trajectory for the next twenty seconds. The other surrounding FLARM devices can draw conclusions about a possible risk of collision. Should a collision be possible, the corresponding FLARM device warns the pilot in the glider or helicopter. XC Tracer II FLARM itself does not warn about possible collisions with other aircraft. XC Tracer II FLARM does receive FLARM signals from paragliders and hang gliders, and sends the data to a cell phone, tablet or e-reader. Depending on the app you use you will then know where your buddies are currently flying. In flight tests prototypes have received signals from FLARM devices up to 29km away.

In addition to this you can also optionally use the obstacle collision warning system from FLARM. This feature will upgrade the FLARM system to also warn about imminent obstacle collisions. Currently available from FLARM is the widely used obstacle database for the Alps region. It includes around 44.000 obstacles in Switzerland, Germany, Austria, Italy, and France. The obstacle database engine and collision algorithms make it possible to handle complex obstacle types. This includes segmented and split power lines and cableways, including types which cross mountain tops.

Please take note that XC Tracer II FLARM is made for paraglider and hang glider pilots flying in Europe, there is no FCC certification planned.

Besides this XC Tracer II FLARM has all the features of XC Tracer Mini II GPS / XC Tracer II: The vario has the time-lagfree indication of lift/sink rate that makes it much easier to find and core thermals than when using a conventional variometer. You can use XC Tracer II FLARM also as an IGC and KML logger, both files are logged in parallel, and the IGC files are accepted by FAI for paragliding competitions. There is a lithium polymer battery built in, when fully charged the battery has enough energy to power XC Tracer II FLARM for more than 25h hours without sunshine (Active FLARM, receiving data from traffic around you). The battery will get charged with power from the high efficiency solar cells during the flight, but you can charge the battery also over the Micro USB cable that is shipped with XC Tracer II FLARM. There is also a Bluetooth Low Energy BLE 4.02 module built in. You can configure the BLE strings that you want to send to your phone, tablet or e-reader using a simple configuration file. And of course does the variometer indicate the climb / sink rate with beeping tones. And the good thing is that you can modify the tone settings as you wish, please check the tone simulator here.

XC Tracer II FLARM is available for preorder exclusively in the webshop of XC Tracer. It is planned to ship the first units before end of February 2019.


Technical Specification

  • FLARM beacon / does transmit FLARM signals (included in sales price)
  • FLARM receiver / receive FLARM signals from paragliders and hang gliders (included in sales price)
  • FLARM obstacle database (optional)
  • Instant indication of climb/sink rate – no time lag
  • presice wind estimation
  • Data transmission to cell phone/tablet/e-reader using BLE 4.2 and/or USB
  • IGC and KML logger
  • Many compatible Apps for Android/iOS
  • Scratch resistant solar panel
  • User configurable acoustics/tone setting with tone simulator at www.xctracer.com
  • Accelerometer/compass/gyro/GPS/BLE/FLARM
  • Minimum 25-hours runtime without recharging
  • Firmware update by drag-and drop
  • Size 57.5 x 57.5 x 18.0 mm and 33.5 mm for the antenna
  • Weight 70g
  • Swiss made